Discussion on sanitation special roller sanding roller brush

Referred to as the brush roller sanding roller, configuration in sanding machine, fabric soft handle, handle the fabric surface with short hair and uniform, feel soft and delicate, fabric strength decreased slightly, not easy to produce stripes sanding common sand. The sanding roller can also be used for metal, non metal surface polishing treatment, socks roughening treatment and other industries, a wide range of applications. The company is specializing in the production of environmentally friendly brush products quality suppliers.
Now the sanding roller making about the following:
1, direct hair grafting: This is the oldest way, that is, the abrasive wire directly planted on the mill roll, the strength can reach very high, the disadvantage is that the cost of hair grafting is high, and can not be part of the change.
2, winding is introduced: a hair planting method, abrasive silk metal strips can be wound, then wound on the roller sanding. According to the length of sanding roller customization, abrasive silk is stuck in the metal strip. The disadvantage is that the strength is not high, and after the winding, only two ends are fixed, so the middle part is fixed with high requirement. Environmental sanitation brush purchasing, please contact us.
3, nylon sleeve: processing is the most convenient, the disadvantage is that the strength is not high, the hair density is limited, and because of the strength of nylon material itself, after long-term use, there will be hair removal phenomenon.